Competition Components
 
Home Blog Terms View Cart
  Search Store:  

Brad Penn Racing Oil

BRAD PENN 30W BREAK IN OIL - CASE of 12

Bookmark and Share


<< Back   E-mail A Friend

BRAD PENN 30W BREAK IN OIL - CASE of 12
BRAD PENN 30W BREAK IN OIL - CASE of 12BRAD PENN 30W BREAK IN OIL - CASE of 12

BRAD PENN® PENN-GRADE 1®
Break-In Oil

SAE 30 mono-grade oil formulated specifically to meet the critical lubrication needs of new engines during break-in while allowing proper seating of rings and component `run-in'. Enhanced levels of "zinc" (zinc dialkyldithiophosphate a.k.a. ZDDP) and superior oil film strength from Penn GradeTM base oils offer complete anti-wear, anti-scuffing protection for even the most demanding of applications such as those presented by break-in of engines with `flat tappet' cams.

 

The Brad Penn® Penn Grade 1® Racing Oils contain the higher level of anti-wear (ZDDP - zinc dialkyldithiophosphate) and enhanced film strength so critical to proper high performance engine protection. The Penn-Grade 1® oils "typical" 1,500 ppm Zinc (Zn) and 1340-1400 ppm Phosphorus (P) content provide the needed anti-wear protection to critical engine parts, such as piston/cylinder walls, roller cams under heavy valve spring pressure and especially those that employ a solid "flat tappet" type system. As important as the chemistry is to the Penn-Grade 1® oils, it is by no means the whole story. The unique base oil cut used to refine the Penn-Grade 1® Racing Oils maintain a tremendous affinity to metal surfaces. This naturally occurring "metal wetting" characteristic enables the oil to stay put on your highly stressed engines and makes the Penn-Grade 1® Racing Oil resist slinging for an extended period of time. Also, rest assured in knowing that the Penn-Grade 1® Racing Oils are 100% Made in the USA.

 

 

NOTE: Shipping oil can be expensive. Shipping 2 cases at once is only a bit more expensive, and lowers the shipping costs per case significantly!

 

Part #: BP30W-12

Price: $73.00

Quantity: