Competition Components
Home Blog Terms View Cart
  Search Store:  

Brad Penn Racing Oil

Brad Penn 30W Break-In Oil - Case of 12

Bookmark and Share

<< Back  

Brad Penn 30W Break-In Oil - Case of 12
Brad Penn 30W Break-In Oil - Case of 12Brad Penn 30W Break-In Oil - Case of 12

Break-In Oil

SAE 30 mono-grade oil formulated specifically to meet the critical lubrication needs of new engines during break-in while allowing proper seating of rings and component `run-in'. Enhanced levels of "zinc" (zinc dialkyldithiophosphate a.k.a. ZDDP) and superior oil film strength from Penn GradeTM base oils offer complete anti-wear, anti-scuffing protection for even the most demanding of applications such as those presented by break-in of engines with `flat tappet' cams.


The Brad Penn® Penn Grade 1® Racing Oils contain the higher level of anti-wear (ZDDP - zinc dialkyldithiophosphate) and enhanced film strength so critical to proper high performance engine protection. The Penn-Grade 1® oils "typical" 1,500 ppm Zinc (Zn) and 1340-1400 ppm Phosphorus (P) content provide the needed anti-wear protection to critical engine parts, such as piston/cylinder walls, roller cams under heavy valve spring pressure and especially those that employ a solid "flat tappet" type system. As important as the chemistry is to the Penn-Grade 1® oils, it is by no means the whole story. The unique base oil cut used to refine the Penn-Grade 1® Racing Oils maintain a tremendous affinity to metal surfaces. This naturally occurring "metal wetting" characteristic enables the oil to stay put on your highly stressed engines and makes the Penn-Grade 1® Racing Oil resist slinging for an extended period of time. Also, rest assured in knowing that the Penn-Grade 1® Racing Oils are 100% Made in the USA.



NOTE: Shipping oil can be expensive. Shipping 2 cases at once is only a bit more expensive, and lowers the shipping costs per case significantly!


Part #: BP30W-12

Price: $73.00